Search Search Site For:

Email Signup:

Trouble Shooting for the 4 Function Remote:

Answer the questions listed below and follow
the instructions to solve your problem.

Question Answer

1.Does the fuse blow as soon as you power the receiver?

YES
Try solution
number 3.
NO
Go to question
number 2.

2. Does your remote operate sporadically or not at all?

SPORADIC
Go to question
number 3.
NOT AT ALL
Skip to question
number 4.
3. Does the remote work only when you are close to the car? YES
Try solution
number 1.
NO
go to question
number 4.

4. Does the transmitter indicator light up green when you push the green button and yellow when you push the yellow button?

YES
Go to question number 5.
NO
Try solution number 2.
5.Can you hear a clicking sound inside the receiver when you push the transmitter buttons? YES
Try solution
number 3.
NO
Go to question
number 6.
6.If you push the code button on the front of the receiver, does the red LED indicator flash? YES
Try solution
number 4.
NO
Try solution
number 5.

 

Problem Definitions & Solutions

1. You are having a range problem. Try moving the white antenna to a better location. Make sure it is not wrapped around anything steel. You might also try new batteries in the transmitter if it is more than a year old.

 

2. Your problem is in the transmitter. If only one button fails to light up, the problem is not the batteries. You will have to call for a replacement. If both buttons fail to light, it is probably the batteries. Call if batteries do not correct the problem.

 

3.The problem is probably not in the remote. Make sure you have a good ground going to the receiver. Check your wiring. All wiring must be complete before the remote will operate. This includes wiring in your window switches following the proper diagram. You can get diagrams by clicking here.  Specialty window switches work the same as GM.

4. Your transmitter probably needs re-coded. Click here for coding instructions. Also check your ground wires on the actuators and the receiver.
5. If the red LED stays on all the time when the unit is powered up, the receiver is shorted and must be replaced. If it fails to light at all, you have a bad ground or the unit is shorted.
 
 
 
1995-2017 © Copyright
BALL's Rod and Kustom LLC
BALL's Power Windows ( Trademark # 85509230 )